Use A Toolbox Inside A Truck Mattress

There's duck egg fitter for Motor lorry owners than a toolbox in which to lock and secure their tools and factor in the Bedstead of their Motor lorry. There should be 4 J-bolts, 4 washers, 4 nuts, 4 rubber plug inserts and a set of keys.3. Insert the rubber plugs into the predrilled holes of the toolbox.4.



Install a Toolbox in a Truck Bed


1. Corner the toolbox in the location where you want to secure it. Keep in mind the door of the toolbox and how it opens so it does not interfere with the rear window or the front bed rail. If you do not have a bed liner that covers the bed rails, you might consider some rubber pads between the toolbox and bed rail to protect the paint of the bed rail.


2. Remove the hardware from inside the toolbox. Although accessible Motor lorry beds rendition a convenient hauling alternative, they further scarcity security when it comes to expensive Accoutrement or Accoutrement that may be compromised in the regulate elements. Stirring the Accoutrement from the Bedstead to the cab when parking the Motor lorry and vise versa can be remodelled tedious. The send: a affirmation locking Motor lorry toolbox

Instructions



Insert the first J-bolt hook under the bed rail and into the hole of the rubber plug insert of the toolbox. Apply the washer and nut and tighten with the ratchet and socket. Continue the same procedure with the remaining J-bolts.