Switch The Spark Plugs Inside A Pontiac Vibe

Lately your Pontiac Vibe does not corner the performance or bent that it adoption To possess. You necessity to proceeds it into a shop and hold it checked outside, however automotive repair costs are expanded than you can afford fair pdq. Extended than feasible, your box could be deficient or defective Glimmer plugs. Worn outside plugs can administer your vehivle that sluggish reaction and create flat performance. Changing Glimmer plugs is a undertaking that you can discharge and save yourself some check while bringing your engine back to growth.

Be careful not to overtighten the plug. Just a snug fit should be enough. Replace the coil on the spark plug and fasten it into place.6.

The clips on the side of the shroud can be unfastened by simply inserting a screwdriver and snapping them out of the way.

2. Locate the electrical harness and follow it to the four black coils at the end. Remove each coil with a 10mm socket wrench. Pull gently so that you don't damage the coils. Make sure to identify each coil and remember which spark plug it went to so you can place it back in the same order.

3. Locate the spark plugs on the top of the engine block. Start with the first spark plug using a spark plug wrench. Gently loosen and remove the plug.

4. Set the gap on the new spark plug with your spark plug gapper. You can find this information in your Pontiac Vibe owner's manual or in a repair manual for your car.

5. Install new spark plug by screwing it into place.


1. Remove the charcoal plastic shroud covering the engine block by undoing the two occupancy down nuts with a 10mm socket wrench.

Repeat the process for the remaining spark plugs. When finished, place the shroud back over the top of the engine. Fasten down with 10mm socket wrench. Snap the keeper pins back into place.