My Whirlpool Washer Leaks In The Bottom

Whirlpool Corp., headquartered in Benton Constitution Township, Michigan, sells products under at variance Trade-mark names, including Whirlpool, Amana and Jenn-Air.

Tub Bearing/Outer Tub

If the tub bearing is going bad, it may leak. Visually examine the bearing, and see if it's worn or broken.


Provided your Whirlpool washer is leaking from the backside, evaluation the pump. This is the most colloquial end for douse underneath the Private room. Blank wall the washing tool. Remove the irrigate in the tub either with a bucket or shop vacuum. Remove the leading housing panel, and peep the pump. Trial the pump housing and the hoses that enter and Way out the pump. Whether any of these components are poor, you must convert the plentiful pump. Buy a brand-new one from a Whirlpool parts dealer thanks to it's exhausting to repair this constituent.


Your Whirlpool washing mechanism has differential seals, including the door (on front-loading machines) and the leading tub seal. Whether you detect water underneath the tub, check the main tub seal. Disconnect the washing machine from the main power source, and remove the main access panel. If the seal is torn or brittle, replace it. Reattach it if it's falling off. While not usually the cause of water underneath the tub, check the door seal; a slow leak causes water to build up under the washing machine, making you think that the leak originates from the washer base. Clean the door seal if it's dirty, or replace it if it's defective.

It further creates washing machines for other companies, including Sears. Whether your washing pc is leaking from the backside, you must direction this complication now to avoid rusting gone the tub. Place the leak, and repair it yourself to save coin.

Replace it. Inspect the outer tub. Look for cracks in the metal or rusted-out sections. If the outer tub is compromised, your washing machine leaks. This is a difficult and often expensive repair. Consider purchasing a new washing machine if the repair is too expensive.

Other Issues

Water can accumulate underneath your Whirlpool washing machine but originate in other areas. Check the fill and drain hoses, and see if the hose connections are tight. Verify that the fill hose washers are installed and correctly seated. See if you are using the correct type and amount of detergent for your washing machine. If not, your washer can overflow because of over-sudsing. Clean the detergent dispenser if it's clogged. Clean your home plumbing, drain or sink if they are dirty.