Replace Oil Pan Gasket

General oil pan

A defective oil pan gasket can close in oil leaks on all sides of the circumference of your oil pan. Many bodies misapprehension a faulty gasket for a defective oil pan and spend hundreds of dollars to alter the pan when a $20 gasket would own solved the complication. Whether you cannot gawk any obvious damage to your oil pan, pennies the gasket aboriginal.

8. Tighten the oil pan bolts to the specified torque level. Each vehicle will have a different rating to which the bolts must be tightened.

Some vehicles admit gaskets; others custom silicone sealant. This Testament bias the replacement procedure. Too conclude the recommended torque levels for the oil pan bolts, it varies from vehicle to vehicle.

2. Stand and advice your vehicle entirely. Applicability a floor jack to lift the front by the predetermined workshop jacking points, and then convenience jack stands to base both sides. Succeed the equivalent procedure for the rear.

3. Area the empty pan underneath the oil void plug on the oil pan. Remove the plug and let the engine oil completely remove into the pan. This should gate approximately 10 to 15 minutes.

4. Manipulate the floor jack to support the bottom of the oil pan. It's best To possess an assistant help you with this.

5. Remove the bolts mounting the oil pan. Some vehicles may require the removal of additional items to access the oil pan, but most won't. Remove what you must; just remember the correct placement for reinstalling it. Oil pans are usually secured by 10 to 15 bolts around the perimeter of the pan. Lower the floor jack while providing hand support for the oil pan.

6. Remove the old gasket. A gasket will sometimes get stuck to either the oil pan or its mounting. Carefully remove the old gasket and thoroughly clean the area. If your vehicle has sealant instead of a gasket, remove all of the sealant from the gasket.

7. Replace the gasket with a new one or apply a bead of sealant to the oil pan. Have an assistant lift the oil pan with the floor jack while you provide support. Once the pan is lifted to the proper location, tighten the bolts to secure the pan and remove the jack.


1. Contact your resident dealer or shop for a repair guidebook particular to your vehicle to clinch whether it has an oil pan gasket. Follow this specifically. Double-check the rating of each bolt when you are finished.

9. Replace the drain plug and any items you had to remove to access the oil pan. Lower the vehicle and add the oil or replace it with new oil.