Trobleshoot and fix The Environment Conditioning Inside A Subaru Outback

Air conditioning problems can be costly to diagnose and repair. Save eternity and resources by trying to troubleshoot the problems yourself. Appropriate a scarce steps to conclude why fair the air conditioning is not working in your Subaru Outback.


1. Probation the controls elementary. Dash off undeniable the air-recirculation Press-stud is not selected instead of the air conditioning. It may seem elementary, on the contrary could prevent a Journey to the dealership or a mechanic.

2. Day one the engine and turn on the air conditioning, adjusting from low to gigantic. Listen for the accompanying sound to accretion when turned on eminent. This is the blower fan. Whether it does not sound hold up, the blower Engine may necessitate replacing.

Find the control panel in a Subaru Outback by first disconnecting the negative battery cable, removing the console box, setting the temperature to "full hot," disconnecting the temperature control cable, removing the gear selector trim panel, unscrewing the panel cover, and removing the radio bracket.6. Test the air conditioning controls to make sure they work properly, such as moving them with right amount of resistance and stopping on the right places.

Make sure the pilot lights inside the vehicle are working and the graphics display is lit. If these are not working correctly it might be the control panel or control cables.

5.3. Bonanza the blower Engine under the glove box lower insert in a Subaru Outback. Remove it from its harness after disconnecting the negative battery cable, and removing the screws.4.

If they are not working properly, this indicates a fuse problem.

7. Find the fuse box in a Subaru Outback by opening the driver's door and sliding the panel near the floor to the right. A fuse box resembles a computer motherboard with multiple colors of plastic fuses plugged in. Carefully remove the fuse with a pair of pliers and replace with a new fuse.