Create A Straight Pipe For Any Truck

In the pursuit of higher horsepower, one effects that you can end is to remove restrictions in your exhaust, creation the exhaust Gauze flow smoother. Catalytic converters are restrictive, and many cats install a straight channel in their vehivle or Motor lorry to eliminate the catalytic converter completely. This may not be legal depending on which sovereign state you animate in; nevertheless provided you're using the Motor lorry for drag racing purposes particular, then it shouldn't be an contention.


Instructions


1. Hold the replacement exhaust tubing against the area where the catalytic converter was and mark the tubing with a permanent marker so you can cut it to length. Use the reciprocating saw to chop the replacement tubing to the mark.4.


This is an oval intersect of exhaust that swells elsewhere from remainder of the tubing and, depending on the year, may hold louvers or vents on the face. Operate the reciprocating epigram and the metal blades to chop the catalytic converter from the exhaust, manufacture trustworthy to accumulate the saw perpendicular to the tubing To possess a nice, straight cut.


3. Hoist the vehicle using the jack and secure it on jack stands. Double-check that the vehicle is secure prior to crawling underneath it.2. Place the catalytic converter on the exhaust.


Hold the exhaust tubing between the two cut sections of the stock exhaust and use the MIG welder to tack-weld the tubing in place. A tack weld is a small, quick weld that secures two pieces together but can be easily removed. Make sure the tubing is aligned correctly and there are minimal gaps in the joints between the tubing before proceeding.


5. Put the welding gloves and welding helmet on, then fully weld the exhaust tubing together, using the MIG welder. Make sure there are no gaps in the exhaust; otherwise, you'll have an exhaust leak.


6. Lower the truck off of the jack stands with the jack.